Fiery Wide Format Forum  

Go Back   Fiery Wide Format Forum > Graphic Arts Products > Fiery Color Profiler Suite

Thread Tools Display Modes
Old 02-16-2008, 03:44 PM
JSpencer JSpencer is offline
Join Date: Oct 2007
Posts: 1
Km 5500/6500

Hi Guys,

Any recommendations for profiler settings on the KM 5500 or 6500 for creating colour profiles. Using Fiery or Creo rips if anyone can help that would be great.

Old 02-21-2008, 08:45 AM
MattP MattP is offline
Join Date: Oct 2006
Location: California
Posts: 30
Printer Presets

Hi James,

If you are printing to a Fiery, then install the Fiery print driver on the workstation that runs Color Profiler Suite. When you select the Fiery to print the profile target, Color Profiler Suite will match the PPD with a profile preset. This preset will populate recommended settings for rendering intents and black generation. I recommend starting with the preset settings for the first profile. You can import the data or profile again and make iterations with adjustments to the settings to customize the results.

Profiling other RIPs will require some investigation as to the calibration and screening used to capture the typical workflow for profiling. This is where the Inspector becomes helpful at analyzing the black, shadows and tints to see the virtual results of your settings and adjustments.
-- Matt MP

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +1. The time now is 07:42 AM.

Powered by: vBulletin Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
2013 Electronics for Imaging GmbH, All Rights Reserved